Turbine parts
For steam, gas and wind turbines, jet engines and fuel cells, in Hastelloy-X and Haynes 188.
A job shop in Clifton Park since 1983
Wire EDM and CNC machining in Clifton Park
Prototype and production parts in titanium, Inconel and carbide, cut to 2 microns on five Fanuc wire EDMs, then milled, turned, ground and checked on a Zeiss CMM.
Wire EDM±.00008 in
Radii down to .001 in, parts up to 16 in thick
Six machining processes in one shop
- Wire EDM
Five Fanuc Robocuts
±.00008 in - Small hole EDM
Holes .012 to .118 in
4th axis - 5-axis milling
Mazak VCU-500A, 4 Haas
to 4,000 lb - CNC turning
Mazak QT Smart 250
18.5 in swing - Grinding
Surface and cylindrical
under .0002 in - CMM inspection
Zeiss Contura G2
27 × 40 × 24 in
Turbine, MRI and defense parts
Each of these was made at AMT, as are aftermarket parts for 2,000 horsepower transmissions.
MRI calibration parts
Held to ±.0001 in, alongside parts for X-ray optics and CT scanners.
Defense prototypes
Tolerances under .001 in, with every part checked on the CMM.
From your drawing to a measured part in 3 steps
Send a drawing or a model
PDF, DWG, DXF, IGES, STEP, Parasolid, SAT and Inventor files all open here.
We program and cut it
Esprit writes the toolpaths and E2 tracks the job through the shop.
We measure it on the CMM
The Zeiss Contura G2 checks the features on your drawing before the part leaves.
Questions buyers ask
The answers engineers usually want before they send a drawing.
Which drawing files do you accept for machining?
PDF, DWG, DXF, IGES, PRT, X_T, IPT, STP, STEP and SAT. Send a PDF drawing with the model when you can.
What tolerances can you hold on precision parts?
Wire EDM to 2 microns (.00008 in), grinding under .0002 in, and probed milling within .0001 in.
Which metals can wire EDM cut?
Any metal that conducts electricity, including titanium, carbide, Waspaloy, Hastelloy, Kovar and Inconel.
What is the largest part you can mill?
50 × 26 × 25 in, up to 4,000 lb.
A shop built for the work in 1988
Steve Petronis and Dick Carusone started AMT in 1983 and moved it into this building five years later.
- Building10,000 sq ft, built 1988
- CNC machinesmore than 20
- OwnerMark Petronis, from 2013
Request a quote
Tell us the part, the metal and how many you need.
Kinns Road, Clifton Park, New York
Monday to Friday, 6 am to 4 pm